Setting up the monitor
Use caution when setting up the monitor
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may
cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will not recover
to its normal condition.
Attaching the monitor feet
Position the monitor head face up on a flat surface covered by a clean, dry cloth.
Attach the feet to the bottom of the monitor head (1) using the eight screws and Allen wrench included
with the monitor (2).
Routing the cables
Locate the cable clip on the back of the monitor and then route the cables through the clip.
on the back of the monitor.
The power connector location does not allow for the AC power cord to be routed through the cable clip.
Chapter 1 Getting Started
The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
The cables should be routed through the cable clip before connecting the cables to the ports