Preset Display Resolutions - HP OMEN X 65 User Manual

Operating altitude
Storage altitude
Power source
Measured power consumption
Full power
Typical settings
Sleep
Off
Input terminal
Optional remote control
Processor
RAM
Storage
Video
Audio
Connectivity
IMPORTANT:
function is turned on. To turn on the OverClock function, open the OSD menu, select Picture, select Gaming,
and set OverClock to On. The default setting is Off, which limits the refresh rate to 120 Hz.

Preset display resolutions

The display resolutions listed below are the most commonly used modes and are set as defaults. This monitor
automatically recognizes these preset modes and they will appear properly sized and centered on the screen.
HDMI display resolutions
Display Mode
VESA 640 × 480
VESA 800 × 600
VESA 1024 × 768
640 × 480p
720 × 480p
720 × 576p
1280 × 720p @ 50
1280 × 720p @ 60
20 Appendix A Technical specifications
The DisplayPort 144 Hz refresh rate for 4K mode applies only when the OSD OverClock
Horz freq (kHz)
31.47
37.88
48.36
31.48
31.5
31.25
37.5
45
0 m to 5,000 m
0 m to 12,192 m
100 V ac to 240 V ac 50/60 Hz
700 W (2 sec)
420 W
<0.5 W
<0.5 W
One audio line-out, one S/PDIF port, one DisplayPort connector, three HDMI
ports, one RJ-45 port, two USB ports, and two USB power charging ports
NVIDIA® Tegra® X1 processor
3 GB
16 GB, adaptable storage over USB Type-A ports
4K HDR supported
High-resolution audio playback up to 24-bit/192 KHz
Gigabit LAN, USB-A 3.0 × 2, Wi-Fi 802.11 AC dual band, 2 × 2 MIMO, Bluetooth
4.1 LE
Vert freq (Hz)
60
60
60
60
60
50
50
60
0 to 16,400 ft
0 to 40,000 ft