Rear Components - HP OMEN X 65 User Manual

Rear components

Component
1 RJ-45 (network) jack
2 USB ports (2)
3 DisplayPort connector
4 HDMI ports (2)
5 HDMI (ARC) port
6 S/PDIF port
7 Analog audio line-out
8 Power connector
9 Master power switch
10 Power button
11 OSD joystick
12 USB charging ports (2)
Function
Connects a network cable to SHIELD.
Connect optional devices to SHIELD.
IMPORTANT: These USB ports connect directly to SHIELD and are used to connect
optional USB devices, such as flash drives for expandable storage, to SHIELD.
Connects a DisplayPort cable to the source device.
Connect an HDMI cable to the source device.
Connects to an audio/video receiver with an HDMI cable.
NOTE: If supported by the receiver, the monitor will receive video and audio from the
receiver and also send audio from the monitor back to the receiver.
Sends digital audio to an audio/video receiver.
Connects optional powered speakers, soundbar, headphones, or earbuds.
WARNING! To reduce the risk of personal injury, adjust the volume before using
headphones, earbuds, or a headset. For additional safety information, see the Product
Notices provided in your documentation kit.
Connects an AC power cord to the monitor.
Turns off all power to the monitor.
NOTE: Setting the switch to the Off position yields the lowest power state for the
monitor when it is not in use.
Turns the monitor on or off.
Opens the OSD menu, selects an item from the menu, or closes the OSD menu.
Provide power charging for USB interface devices.
Product features and components 3