Download  Print this page

Removing The Monitor Feet; Attaching The Monitor Head To A Mounting Device - HP OMEN X 65 User Manual

Hide thumbs

Advertisement

Removing the monitor feet

CAUTION:
Before beginning to disassemble the monitor, be sure that the monitor is turned off and all cables
are disconnected.
1.
Disconnect and remove all cables from the monitor.
2.
Position the monitor head face up on a flat surface covered by a clean, dry cloth.
3.
Remove the screws from the feet (1) and detach the feet from the monitor (2).

Attaching the monitor head to a mounting device

1.
Remove the monitor feet. See
2.
Locate the 400 mm x 400 mm VESA mounting holes on the back of the monitor. Then follow the
instructions included with your mounting device.
IMPORTANT:
wall or swing arm.
Removing the monitor feet on page
Follow the mounting device manufacturer's instructions when mounting the monitor to a
9.
Setting up the monitor
9

Advertisement

Table of Contents

   Related Manuals for HP OMEN X 65

This manual is also suitable for:

Hsd-0015-qOmen x emperium 65

Comments to this Manuals

Symbols: 0
Latest comments: