Second webcam and webcam transfer board
Table 5-4
Second webcam, webcam transfer board, and cable descriptions and part numbers
Description
Second webcam (includes bracket)
Webcam transfer board (includes cable)
Webcam transfer board cable (included in Cable Kit)
Before removing the second webcam, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the keyboard/top cover (see
Remove the second webcam:
1.
Turn the keyboard/top cover upside down with the front edge toward you.
2.
Remove the two Phillips M2.0 × 2.0 broad head screws (1) that secure the webcam bracket to the
keyboard/top cover.
3.
Remove the bracket (2).
4.
Disconnect the cable from the ZIF connector on the webcam transfer board (1).
5.
Lift the foil from on top of the webcam (2).
6.
Remove the Phillips M1.6 × 2.0 screw (P0 driver) (3) that secures the second webcam to the
keyboard/top cover.
(Preparation for disassembly on page
Keyboard/top cover on page
Spare part number
L43799-001
L58581-001
L58572-001
24).
24).
Component replacement procedures
29