Solid-State Drive - HP ProBook x360 11 G4 Education Edition Maintenance And Service Manual

Solid-state drive

Table 5-6 Solid-state drive descriptions and part numbers
Description
256 GB, M.2, PCIe solid-state drive
128 GB, M.2, SATA-3 solid-state drive
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the keyboard/top cover (see
3.
Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the bottom cover. (The
solid-state drive tilts up.)
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
32 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page 31).
Spare part number
L58578-001
L58577-001
24).
24).