Recording A Cd - Sony MHC-W550 Operating Instructions Manual

Recording a CD

— CD Synchro Recording
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO
recording level is adjusted automatically.
DISC SKIP
EX-CHANGE
DOLBY NR
1
Press § and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
12
) tapes. The
2
2
p π
1 2 3
§
1
3 5 4
ª AUTO REVERSE ·S E
REC/PLAY
0 )
2
Press 6 OPEN/CLOSE and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP
EX-CHANGE repeatedly so that it lights
green.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
3
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. ·
(for front side) lights up.
4
Press DIRECTION MODE
repeatedly to select A to record on
one side. Select a (or RELAY) to
record on both sides.
5
Press PAUSE P on deck B.
Recording starts.
To stop recording
B Press π on deck B or p on the CD player.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR B" appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE ( a or
RELAY) is off when the mains AC power supply
is switched off.
1 2 3