Playing Cds Without Interruption - Sony MHC-W550 Operating Instructions Manual

To
Check the CHECK on the remote
program repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with
program
2 Select the track by
3 Press ENTER/NEXT.
p once in stop mode or
Clear the entire
program twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press ·P to
play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20
– the total playing time has exceeded 100 minutes.
Press
one of the DISC 1~3
buttons.
turning the jog dial.
Playing CDs without
interruption
–– Non-Stop Play
You can play CDs without pausing between
tracks.
POWER
1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD.
2
Press and hold down ·P until
"NON STOP PLAY" appears and
the disc number blinks.
To cancel Non-Stop Play
Press and hold down ·P until "NON
STOP PLAY OFF" appears.
The disc number stops blinking.
Note
"NON STOP PLAY" also works for CD synchro
recording.
1
2
1 2 3
p
21