Cd Synchro Recording - Sony MHC-GNX100 Operating Instructions Manual

--
CD Synchro Recording
You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1 Load a recordable tape into Deck B.
2 Press CD and load a disc you want to
record.
When you want to record an album of MP3
audio tracks, press PLAY MODE on the
remote repeatedly until "ALBM" lights np
in the display. Then turn and hold
ALBUM +_ clockwise or
counterclockwise and release it at the album
you want (or press ALBUM +M on the
remote repeatedly).
3 Press CD SYNC.
"SYNC" lights np in the display.
"REC" flashes in the display.
Deck B standby for recording.
4
Press DIRECTION repeatedly to select
"_--" to record on one side or "c_-Y'
(or "RELAY") to record on both sides.
5 Press REC PAUSE/START.
"REC" lights up in the display.
Recording starts.
To stop recording
Press •.
To record a disc by specifying
track order
-- Program Edit
You can record tracks on all the discs in the
order you want using Program Play. Between
steps 2 and step 3 of"CD Synchro Recording"
(page 24), do steps 2 to 6 of"Creating yonr own
program" (page 17). When programming, make
sure the playing times lbr each side do not
exceed the length of one side of the tape.
Note
You catmot listen to other sources while recording.
Tips
• For recording from the reverse side:
After step 1, press TAPE A'B (or TAPE on the
remote) repeatedly until "TAPE B" appears in the
display. Press _,I1_ (or _ on the remote)
repealedly lmtil TAPE B reverse side indicator "_l"
lights up in the display to start playback of die
reverse side. Press • at the point you want to start
recording.
• When you record on both sides, be sine to start fiom
the fiont side. If you start fioln tlle reverse side,
recording stops at the end of the reverse side
24GS