Sony MHC-W550 Operating Instructions Manual page 11

To Do this
Stop playback Press p (p on the remote).
Pause Press ·P (P on the remote).
Press again to resume
playback.
Select a track During playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. Or press
+ (to go forward) or =
(to go back) on the remote.
Press and hold down ) or
Find a point in
a track 0 (or )/0 on the
remote) during playback and
release it at the desired point.
Select a CD Press one of the DISC 1~3
in stop mode buttons or DISC SKIP
EX-CHANGE.
Play only the Press 1/ALL DISCS
CD you have repeatedly until "1 DISC"
selected appears.
Play all CDs Press 1/ALL DISCS
repeatedly until "ALL DISCS"
appears.
Remove the CD Press 6 OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press VOL
volume +/– on the remote).
Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P or one of the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
11