Configure A Pulse Wave - Hantek HDG 2000 Series User Manual

SCPI Programming Reference
SOURce1:VOLTage:OFFSet 1.0
OUTPut1 ON

5.3.4 Configure a Pulse Wave

Description
A pulse wave has amplitude, offset, and phase relative to sync pulse. It also adds edge slope,
period, and duty cycle (orpulse width). Its amplitude and offset can also be set using high and low
voltage values.
The following commands produce the pulse wave shown above.
SOURce1:FUNCtion PULS
SOURce1:FUNCtion:PULSe:TRANsition:LEADing 0.00000004
SOURce1:FUNCtion:PULSe:TRANsition:TRAiling 0.000001
SOURce1:FUNCtion:PULSe:WIDTh 0.000003
SOURce1:FREQuency 200000
SOURce1:VOLTage 3
OUTPut1 ON
HDG2000 Series Arbitrary Waveform Generator 95