Configure A Square Wave; Configure A Ramp Wave - Hantek HDG 2000 Series User Manual

SCPI Programming Reference
SOURce1:VOLTage 2
OUTPut1 ON
SOURce1:PHASe 90

5.3.2 Configure a Square Wave

Description
A square wave has amplitude, offset, and phase relative to sync pulse. It also has duty cycle and
period. Its amplitude and offset can also be set using high and low voltage values.
The following commands produce the square wave shown above.
SOURce1:FUNCtion SQUare
SOURce1:FUNCtion:SQUare:DCYCle 20
SOURce1:FREQuency 100000
SOURce1:VOLTage 4
OUTPut1 ON

5.3.3 Configure a Ramp Wave

Description
A ramp wave has amplitude, offset, and phase relative to sync pulse. It also has symmetry for
creating triangular and other similar waveforms.
The following commands produce the ramp wave shown above.
SOURce1:FUNCtion RAMP
SOURce1:FUNCtion:RAMP:SYMMetry 25
SOURce1:FREQuency 1000
SOURce1:VOLTage 2
HDG2000 Series Arbitrary Waveform Generator 94