Installation Of Product; Adjustment Of Feet - Russell Hobbs RHTEC1 Manual

4.2 INSTALLATIN OF PRODUCT
• The earthing cable must be connected to the terminal. You have to ensure the
cable with insulation be connected to the power source during the connection of
cable. If there is not an appropriate earthed electric outlet in accordance with
regulations in the place where the appliance will be installed, immediately contact
qualified professional.
• The earthed electric outlet must be close to the appliance. Do not use the
extension cord.
• The supply cable must not touch the hot surface of the product.
• In case the supply cable is damaged, you must contact a Qualified Professional.
The cable must be changed by the authorised service an qualified professional.
• The wrong electric connection may damage your appliance. Such damage is not
covered by the guarantee or responsibility of the manufacturer.
• The appliance is adjusted as appropriate for 230-240 Volts of electricity.
• The electric cable must not touch the hot parts of the appliance. The electric cable
must not touch the back part of the appliance, otherwise the electric cable of
appliance may be damaged, and this may cause the product to short circuit.
• The producer declares that it has no responsibility against any kind of damages
and losses that emanate from the following security norms.
• Provide a means of disconnection from the supply having an air gap contact
separation of at least 3mm in all active (phase) conductors. Such means of
disconnection shall be incorporated in the fixed wiring according to the wiring rules.
• The appliance is provided for fixed connection to the power supply. The
connection of the appliance to an electrical source must be done by a qualified
professional.
• For fixed connection, use the H05VV, H05V2V2 or H05RR type supply cord.
2 2
• For fixed connection, use 3x2,5mm or 3x4mm sized cable according to
appliances power and terminal box label.

4.3 ADJUSTMENT OF FEET

The cooker stands on 4 adjustable feet. When the product is placed where it is to
be used, check if the product is balanced. If it is not balanced, you can make the
adjustment by turnýng the feet clockwise if required. It is possible to raise the
appliance maximum 35mm by the feet. If the feet are adjusted do not move the
appliance by dragging, it sholuld be moved by lifting it up.
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-7-