Warnings - Russell Hobbs RHTEC1 Manual

3: WARNINGS

TAKE ALL IMPORTANT SAFETY MEASURES AND READ THE MANUAL
COMPLETELY BEFORE USING THE PRODUCT
This product has been designed for non-professional, domestic use only.
Check whether there is any damage after you unpack the product. If there is any
damage; do not use the product and contact to the authorized maintenance
service. As the materials used for package(nylon, stapler, styoroam, etc.) may
cause harmful effects to children, they should be collected and removed
immediately.
The product must be set up by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement.
Before connecting the product to the mains at home, check the conformity of
voltage, which is specified on the information sticker attached to the appliance
and/or packaging, with the usage conditions available.
The power cord must never be changed by the customer. If it is damaged for any
reason, please contact to the authorized service.
Before changing the oven's lamp, unplug it.
Switch off the appliance before cleaning, maintenance work etc.
Some parts of the product may preserve their heat for a long time; please wait
until the parts primarily exposed to heat cool off before touching them.
Do not keep flammable materials close while the product is operating.
When operating other electrical devices near the appliance, be carefull that their
cables do not come into contact with the heated parts.
When the appliance is not in use, make sure that the switches are in ''0'' (off)
position.
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-4-