General; Cleaning The Oven; Cleaning The Ceramic Hob - Russell Hobbs RHTEC1 Manual

6: CLEANING AND MAINTENANCE OF YOUR OVEN

6.1. GENERAL

Before starting to clean your oven, be sure that all control knobs are off and your
appliance is cooled off.
Before using the cleaning materials check whether they are appropriate and
recommended by the manufacturer of your oven. As they may damage the
surfaces, do not use caustic creams, abrasive cleaning powders, thick wire wool or
hard tools.
Do not use cleaning materials containing particles that might scratch the
enameled and painted parts of your oven.
In the event of excess liquids spilling over your oven, immediately clean up the split
liquids.
Do not use steam cleaners for cleaning the oven.

6.2. CLEANING THE OVEN

Make sure to unplug the oven before starting to clean it.
You will obtain best results if you clean the oven interior while the oven is slightly
warm. Wipe the oven with a soft cloth that has been dampened in soapy water after
each use. Then wipe it with a wet cloth once more and then dry it. It may be required to
use a liquid cleaning material from time to time. Do not clean with dry powder
cleansers.

6.3. CLEANING THE CERAMIC HOB

Unplug the oven before starting to clean it.
Before cleaning wait for ceramic cooker to coll down completely. Be sure that
cleaning material does not contain any particles which may cause to scratch glass.
Use cream or liquid detergent. Ceramic surface must be cleaned with cold water and
dried with soft cloth in way that no cleaning material may be left.
Steel cleaning material may damage ceramic glass. Dust on the surface must be
cleaned with a wet cloth. Colour change on ceramic surfaces does not affect
functional structure and durability of ceramic.
Colour change is caused by not cleaning the residues, erosion due to casseroles and
using not appropriate cleaning materials and is not due to material change.
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
-15-