5.2. USE OF HOTPLATES
The hob part of the appliance is controlled via knob with 7 positions on the control
panel. Position ''0'' means off position. The remaining 6 positions indicate the
following types of use:
The knob rotation direction may differ according to the product specification.
Surfaces of hotplates are covered by a protective layer. At first use, operate the
hotplates without a pan at level 3 for 5 minutes.
Recommendations:
•
Pans with flat bases.
• T
he size of the pan must be in line with the size of the hob heating elements for most
efficent usage.
•
Always center the pan on the heating element.
•
Using small sized pans on large sized heating elements will cause heat loss and so
energy will be wasted.
CORRECT
•
After using any hob, please make sure that it is switched off.
•
Never touch any heating element, after it is turned off, because it keeps the heat for
a certain period.
•
Some ceramic models may a have hot surface warning light.
• Do not let children come close to the appliance during usage or immediately after.
• Clean the electrical cooker with a wet cloth when the cooker has cooled. If there is
an excess amount of dirt, you can clean it with detergent.
Heat for w few minutes for the upper part to dry after cleaning.
For Customer Services, Spare parts & Warranty Information please call 0845 683 8717
1
2-3
4-5-6 : Cooking, frying and boiling position
WRONG
pot bottom is round
-10-
: Heat maintenance position
: Heating in low temperature position
WRONG
pot buttom is small
WRONG
pot buttom does not sit well