Control Via Contacts/Remote Contacts - BONFIGLIOLI Vectron Agile VABus/TCP Communications Manual

11.1 Control via
contacts/remote contacts
In operation mode "Control via contacts" or "Control via remote contacts" (Parameter
Local/Remote
puts or via the individual bits of the virtual digital signals in the control word. The func-
tion of these inputs is described in the frequency inverter user manual.
15 14 13 12 11 10 9
The digital inputs set via the control word can be monitored using parameter
250. Digital input S1IND will only be displayed if controller release is switched
Inputs
on at STOA and STOB and the control word (Bit 0) was set. If the data set switching
function is used, please ensure that Parameter
trol via remote contacts" is set in all data sets used.
50
412 = 0 or 2), the frequency inverter is controlled directly via digital in-
Control word (
8 7 6
Agile
VABus/TCP
Local/ R em ote 412 = 2)
5 4 3 2 1 0 Bit
0 STOA and STOB
1
IN1D
2
IN2D
3
IN3D
4 IN4D
5 IN5D
6 MFI1D
7 MFI2D
8
-
9 -
10 -
11 -
12 -
13
-
14
-
15
-
Local/Remote
Digital
412 is set to "2 – Con-
12/13