Bosch Rexroth IndraControl VDP 15.3 Operating Instructions Manual page 25

VDP 15.3, 18.3, 21.3 Multitouch
Fig. 10-5: Clamp fastening
4. Tighten the clamping screws.
NOTICE
Tighten the screws and nuts with the corresponding torque according to the fol-
lowing table.
Threads
M2.5
M3
M4
M5
Tab. 10-1: Mounting torques
DOK-SUPPL*-VDPXX.3MTBU-IT02-EN-P
Assembly, Disassembly and Electrical Installation
Mechanic damage due to incorrect mounting
torque.
Mounting torques
0.4 Nm
0.7 Nm
1.4 Nm
1.0 Nm
Bosch Rexroth AG
19/37