MON170CL | Instruction Manual | Important Safeguards Important Safeguards 1. Read, Follow, and Retain Instructions - All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future reference. 2. Heed Warnings - Adhere to all warnings on the unit and in the operating instructions.
MON170CL | Instruction Manual | Safety Precautions For Indoor Product 1. Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet location.
MON170CL | Instruction Manual | FCC & ICES Information FCC & ICES INFORMATION (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
MON170CL | Instruction Manual | Front Panel and I/O Connector Diagrams B C D Figure 1: Front Panel Figure 2: I/O Connectors Bosch Security Systems | 6 July 2005 Key: A. “ i ” (Info) Button B: -, + Buttons C: “...
For additional information, see ww.boschsecurity.com. Bosch Security Systems | 6 July 2005 GENERAL FEATURES The MON170CL is a 17-inch TFT monitor with a 1280 x 1024 XGA resolution which has been designed to display both PC and Video images. It complies with the power management regulations of VESA DPMS, it is supported by Plug &...
MON170CL | Instruction Manual | Installation 5.2 Desktop Installation The MON170CL monitor is delivered with a 3-pole US style power cord and a 3-pole Euro style power cord. Use the US style power cord where 120 VAC, 60 Hz power is available, and the Euro style power cord where 230 VAC, 50 Hz power is available.
MON170CL | Instruction Manual | Installation 5.4 Connecting the Y/C (S-video) Signal to the Monitor There is one (1) mini-DIN type connector for the S-video (Y/C) input (see Figure 2 and Figure 3 below). N N O O T T E E : : Both Y and C inputs are terminated with 75 Figure 3: Y/C Connection Pinout 5.5 Connecting Audio to the Monitor...
MON170CL | Instruction Manual | Operation 5.8 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. OPERATION 6. 1 Front Panel Controls (i) Input • Press this button to display the input signal which is selected on the screen •...
Page 11
MON170CL | Instruction Manual | Operation Input Select OSD Setup H. Position: Adjusts the OSD horizontal position. (0-100) V. Position: Adjusts the OSD vertical position. (0-100) OSD Timeout: Adjusts the OSD window display time. (0-100) Language Language: Select the language to be used in OSD.
MON170CL | Instruction Manual | Operation 6.2.2 VGA Mode Only Image Setup Focus: Adjusts the focus value. (0-100) Clock: Adjusts the clock frequency. (0-177) Image Position H. Position: Adjusts the horizontal position. (0-100) V. Position: Adjusts the vertical position. (0-100) Bosch Security Systems | 6 July 2005 6.3 Notation...
MON170CL | Instruction Manual | On-Screen Display Menu Configuration ON-SCREEN DISPLAY MENU CONFIGURATION 7. 1 CVBS/ S-VIDEO Mode CVBS/ S-VIDEO Bosch Security Systems | 6 July 2005 Contrast Luminance Brightness Tint Color Temp. Color Input Select S Video CVBS H. Position OSD Setup V.
MON170CL | Instruction Manual | On-Screen Display Menu Configuration VGA Mode Bosch Security Systems | 6 July 2005 Contrast Luminance Brightness Focus Image Setup Clock H. Position Image Position V. Position 9300 K 6500 K Color Temp. User S Video...
MON170CL | Instruction Manual | Technical Specification Appendix A - Technical Specification Electrical Rated Voltage 120/230 VAC, 50/60 Hz Voltage Range 100 to 240 Power at Rated Voltage 30 W Sync Format PAL/NTSC LCD Panel TFT LCD Screen Size 338.0 (H) x 270.3 (V) mm (13.3 x 10.6 in.) Viewable Picture Area 43 cm (17 in.) measured diagonally...