Installing The Ball Mount Adapter; Home Screen - Garmin OVERLANDER Quick Start Manual

1
Press the mount
suction cup ball
into place.
2
Open the lever
suction cup to the windshield,
and flip the lever back toward the
windshield.
The lever must be oriented
toward the top of the windshield.
3
Extend the suction cup arm
4
If necessary, rotate the mount so
the Garmin logo faces right-side
®
up.
5
Plug the vehicle power cable
into the port on the mount.
Quick Start Manual
onto the
until it snaps
6
, press the
7
Installing the Ball Mount
Adapter
Your device includes a one-inch ball
mount compatible with other third-
party mounting solutions.
.

Home Screen

NOTE: The home screen layout may
vary if it has been customized.
Place the back of the device onto
the mount.
Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
Secure the ball adapter
mount using the included
screws .
to the
3