Testing the Fuse
XW Warning
To avoid electrical shock or injury, remove
the test leads and any input signals before
replacing the fuse.
Test the fuse as described below and shown in Figure 10.
Replace the fuse as shown in Figure 11.
1.
Turn the rotary switch to the position.
2.
Press and hold . If the display reading is ,
the fuse is bad and should be replaced.
Shop for Fluke products online at:
MyFlukeStore
www.
Insulation Testers
315 mA
INSULATION TESTER
1507
Fuse
Figure 10. Testing the Fuse
1.800.561.8187
.ca
Testing the Fuse
OK
bbw06f.emf
19