Table 4 Display Indicators (cont.)
Indicator
Polarization index or dielectric
absorption ratio test is selected.
Ohms lead zero is active.
ZERO
VAC, VDC, Ω,
Measurement units
kΩ, MΩ, GΩ
Primary display
V DC
Volts
Secondary display
Indicates selected pass/fail compare
COMPARE
value.
Insulation test indicator. Appears when
insulation test voltage is present.
Shop for Fluke products online at:
Description
MyFlukeStore
www.
Table 5. Error Messages
Message
Description
Appears on the primary display and
indicates that the battery is too low for
reliable operation. The Tester will not
operate at all until the battery is replaced.
The also appears when is on the
primary display.
>
Indicates an out of range value.
Invalid calibration data. Calibrate the Tester.
1.800.561.8187
.ca
Insulation Testers
Understanding the Display
9