otometrics ICS Impulse USB User Manual page 48

User Guide
2. Make note of the entries for
ent computers. (For computers connected to a printer, you can click
Both
3. If was selected
Server
4. If
Client installation
1. Select Client
2. Enter the port number and the server computer name obtained from the server installation.
Next
3. Click
Complete the installation
Install
1. Click
server-only
2. For
3. For all other installations, click
.
15.3 Connecting the goggles
Note The current version of software does not support the previous version of the goggles where the connection to
•
the computer was through an interface box. The current version of goggles has a single cable that connects directly
to the computer.
1. Remove the cover from the goggle lens.
Note Keep the cover. When the goggles are not in use, put the cover back on to prevent dust from accumulating on
•
the lens.
2. Connect the USB cable to the 2.0 USB connector on the computer.
3. If installing the synchronized room video, continue to
(OTOsuiteV icon found on the desktop) to open the application.
15.4 Installing the synchronized room video
Note
To use the synchronized room video with OTOsuite Vestibular, the software license with synchronized
•
room video must be purchased from Natus Medical Denmark.
48
Port Number
, Next
click and continue at
Next
was selected, click and continue at
and click Next .
Complete the installation ► 48
and continue at
. A status window appears reporting the progress of the installation.
Finish
installations, click
Finish
Server Computer Name
and
Complete the installation ► 48
Complete the installation ► 48
.
Importing demo data ► 50
and continue at
Connecting the goggles ► 48
and continue at
Installing the synchronized room video ► 48
as this information will be required for all cli-
Print to print out the information.)
.
.
.
.
Otometrics - ICS Impulse USB
. Otherwise, click