otometrics ICS Impulse USB User Manual page 44

User Guide
3. To give the user privileges to change the system settings, click
gives the user access to
• Set cutoff lines for gain normative data
• Enter e-mail settings used for mailing reports
• Choose patient, facility, and operator information to include in reports
• Perform database operations
• Enter GDT interface settings
• Change catch-up saccade parameters and restore to default parameters
For information about these settings, refer to the Reference Manual.
Note
Both user name and password are case sensitive.
•
4. Enter data. Entries that cannot be left blank are marked with an asterisk (*).
Save
5. Click
Edit user data
1. Select the user from the list.
2. Click Edit
3. Edit the changes making sure all required fields marked with an asterisk (*) are completed.
Save
4. Click
44
Cancel
to save the changes. Click
.
Cancel
to save the changes. Click
Allow User to Change System Settings
to discard the changes.
to discard the changes.
(B). This setting
Otometrics - ICS Impulse USB