Page 2
The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
3-Way high-response valve with VCD Operation Manual Series TPQ 1. Introduction ® Parker TPQ 3-way high-response valves with VCD • high dynamic actuator principle with special technology have an integral electronic and requires designed electronic driver only one sole electrical common for the control •...
Reference Command µC B: 0... 10 V ± 0... 20 ± S: 4...12...20 mA Diagnostic spool stroke 0... 10 V ± Supply voltage 22...30 V= Do not connect with the supply voltage zero. TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
EN 61000-6-2, EN 61000-6-4 Electrical connection 6 + PE acc. EN 175201-804 Wiring min. ] 7x1.0 (AWG16) overall braid shield Wiring length [m] 50 Accu port XX: Please contact Parker for installation recommendation. TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
Storage Storage requirements period This operation manual is valid for 3-way high- response valves TPQ series. Any different or constant humidity < 60 % as well 12 months beyond it usage is deemed to be as not intended. as constant temperature < 25 °C...
HFC: choose the right seal option. Special gaskets may be available depending on For operation with the following pressure fluids the utilized fluid. please consult Parker: In case of doubt please consult Parker. TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
Angled female connector (ordering no. 5005160) For NG25 to NG50 A female connector with metal housing is required! Plastic made models may create function problems due to insufficient EMC- characteristics. Do not disconnect cable socket under tension! TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
(cross section AWG 6). Wiring diagram of supply voltage control system valve 22...30 V 4 Am TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
Page 11
4…12 mA 0…-10 V 4…12 mA 0…+10 V 12…20 mA 0…+10 V 12…20 mA 0…-10 V Cable break, Cable break, 0…3.6 mA 0…3.6 mA 12.5 V 12.5 V Overload 12.5 V Overload 12.5 V TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
Plug for file for further documentation. parametering interface The PC software can be downloaded free of charge at www.parker.com/isde - see page “Support” or directly at www.parker.com/propxd. For program installation and software operating please see operation manual 5715-687. The manual can be downloaded at www.parker.com/isde –...
Page 13
Closer information can be can be displayed via the ProPxD Parametrier software. Error code Error code Error description (additive) no errors over current cable break command signal cable break feedback signal undervoltage error bus communication error hardware failure TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...
X X contacts of central connector contaminated clean contacts / replace plug feed cable interrupted fix feed cable X X X X X X wiring sequence incorrect correct wiring sequence X feed cable without shielding change cable grade TPQ 5715-653 UK 29.04.19 Parker Hannifin Corporation...