Replace Ram Air Regulator; Reassembly - Graco L20c Instructions - Parts Manual

Replace Ram Air Regulator

Numbers in parentheses refer to Parts, page 10.
1. Relieve pressure.
2. Remove four screws (7a) and take off the ram air
regulator (7).
3. Replace o-rings (7b) on back side of regulator.
4. Attach new air regulator to manifold. Use index pin
for correct orientation. Tighten screws until snug.

Reassembly

1. Using four screws, attach the integrated air controls
to the mounting bracket. See F
2. Attach the ram up, ram down, and blowoff air lines
as shown in Figure F
255650 (shown)
Auxiliary
air supply port
F . 6
IG
3. Attach all other hoses and replace shrouds.
312374H
. 2.
IG
. 6.
IG
}
Not included
with 24C824
Ram up
Blowoff
Ram down
ti10778a
Integrated Air Controls
5