Carrier 38MPRA Series Service Manual page 37

P2 (High temperature protection of IPM module diagnosis and solution)
Description: If the temperature of IPM module is higher than limited value, the LED displays this failure code.
Recommended parts to prepare:
• Faulty PCB
• Connection problems
Troubleshooting
Check the fastening screws on the
PCB and IPM radiator.
fixed tightly?
Tighten the screws and apply
silicon grease.
SG-38MPRA-02
Are they
NO
Specifications subject to change without notice.
Replace the outdoor
YES
control PCB.
37