Getting Started
Turning On the Power
A A A A
Press the operation switch on the
1
right side of the control panel.
The On indicator lights.
Note
❒ If the power does not come on
when the operation switch is
pressed, check the main power
switch is on. If it is off, turn it on.
Turning Off the Power
Limitation
❒ You cannot turn the power off by
pressing the operation switch
w h i l e t h e m e s s a g e "
" is displayed.
wait.
❒ For 10 seconds after the power is
turned on and the screen is dis-
played, you cannot turn the power
off by pressing the operation
switch.
❒ For 10 seconds after copying is fin-
ished and the machine stops, you
cannot turn the power off by press-
ing the operation switch.
22
A A A A
Press the operation switch.
The On indicator goes off.
❒ When you press the operation
ABB005S
Turning Off the Main Power
Important
❒ When the On indicator lights, do
n o t t u r n o f f t h e m a i n p o w e r
switch. Doing so may result in
damage to the hard disk or memo-
P l e a s e
ry, leading to malfunctions.
❒ Make sure to turn off the main
power switch before pulling out
the power plug. Not doing this
may result in damage to the hard
disk or memory.
A A A A
Make sure the On indicator is not
lit.
B B B B
Turn off the main power switch
on the left side of the machine.
The main power indicator goes off.
Note
switch, the indicator does not
go off in the following cases:
• During communication with
external equipment.
• When the hard disk is active.
ABB005S