Table of Contents
Advertisement
❖ ❖ ❖ ❖ Fine Ratio:Copier
Depending on paper type, environment, and humidity, copy paper can ex-
pand or shrink slightly. This means that the size of the copy and the original
do not match. If this happens, you can specify the vertical and horizontal cor-
rection ratio. You can specify this setting for each paper type (plain, translu-
cent, film)
Note
❒ Default: 0.0%
❒ From –1.0% to 1.0% (in 0.1% increments)
❒ To set the Fine Ratio setting, measure the length of the original and the
copy image to calculate the ratio.
Calculating the Correction Value (%)
Example)
Original
Horiz.
To copy at the same size as the original
... For the example above:
Set the correction value (horizontal) to 0.8%.
ABB009S
Copy
Horiz.
correction value(%)
ZEDG010E
Settings You Can Change with User Tools
3
39
Hide quick links:
Advertisement
Table of Contents
