Table of Contents
Advertisement
Troubleshooting
4
is displayed
1. Open the
paper roll tray,
and then slowly
pull up the
edge of the
jammed paper.
6. Rotate the paper
roll until the edge
of the paper is fed
into the rubber
part of the roller.
Note
Make sure the
paper is not
loose, and insert
it straight into the
roller.
54
2. Cut the edge of the paper roll by
sliding the cutter knob right to left,
or left to right ( ), and then remove
the offcut ( ).
Note
Be sure to return the cutter knob to
the right or left end of the cutter area.
7. Rotate the paper
8. Cut the edge of the paper roll by
feed knob in the
sliding the cutter knob right to left,
direction of the
or left to right to ( ), and then
arrow until the
remove the offcut ( ).
edge of the paper
roll emerges.
Note
Be sure to return the cutter knob
to the right or left end of the
cutter area.
B is displayed
1. Lift both main unit
opening levers,
and then open the
main unit upward.
3. Turn the paper
4. If you cannot
feed knob 90
remove the
degrees forward.
jammed paper,
rotate the paper
in the direction of
the arrow until
the edge
emerges.
9. Turn the paper
feed knob 90
degrees forward.
10. Close the paper
2. Remove the
jammed original.
3. Close the main unit.
5. Cut the edge of
the paper using
the cutter or
scissors.
roll tray.
Hide quick links:
Advertisement
Table of Contents
