Table of Contents
Advertisement
P is displayed
1. Hold both sides of
2. Remove the
the original cover
jammed paper.
with both hands,
3. Close the original
and then open the
cover with both
original cover.
hands gently.
C is displayed
1. Open the rear
cover holding C1
at the rear with
both hands.
2. Hold the C2 knob,
3. Remove the
and then tilt the
jammed paper.
top of the fusing
unit forward.
4. Close the fusing unit
and rear cover.
is displayed
1. Pull out the cut
paper tray while
lifting upward and
out.
3. Remove the jammed
paper.
Note
If the jammed paper
is forcefully pulled
out, it may tear and
scraps may leave in
the machine
xClearing Misfeeds
5. If you cannot
remove the
jammed paper or
the paper misfeed
display does not
disappear,
proceed to
B is displayed
.
2. Hold both sides and
lift the front of the tray,
and then remove it
from the machine.
4. Insert the cut paper
tray while lifting
upward into the
machine, push
slowly until it stops.
Note
If you push the cut
paper tray forcefully,
the tray's paper
guide may become
out of position.
ABB013S
55
4
Hide quick links:
Advertisement
Table of Contents
