Control Panel - Ricoh Aficio 240W Operating Instructions Manual

Control Panel

This illustration shows the control panel of a machine that has all options fully
installed.
1 2 3
21 20
{ { { { User Tools} } } }
1.
Press to change default settings and oper-
ating conditions to your requirements.
See p.29 "User Tools (System Settings)".
It also displays the total number of copies
made. See p.9 "Counter" .
{ { { { New Job} } } } key (copier mode)
2.
Press to make settings for next copy job
and scan the originals during copying.
See "Job Preset", Copy Reference.
3.
Indicators
Display errors and machine status.
• L: Service Call indicator
• x: M i s f e e d i n d i c a t o r . See p.52
"xClearing Misfeeds".
• M: Open Cover indicator
• E: Used Toner Full indicator
• D: Add Toner indicator. See p.50
"DAdding Toner".
• C: Load Paper indicator
• Set Original: Indicates the machine is
ready to scan.
4.
Display
Displays the keys to operate each func-
tion, operation status, and error messag-
es.
4
19 18 17
{ { { { Program} } } } key (copier mode)
5.
Press to store or recall frequently used
settings. See "Programs", Copy Reference.
{ { { { Clear Modes} } } } key
6.
Press to clear the current settings.
{ { { { Energy Saver} } } } key
7.
Press to enter Energy Saver mode. When
you press this key again, the machine re-
turns to the ready condition. See p.23
"Energy Saver mode".
{ { { { Interrupt} } } } key
8.
Press to make interrupt copies during
copying or printing. See "Interrupt
Copy", Copy Reference.
9.
Main power indicator and On in-
dicator
The main power indicator lights when
the main power switch is turned on. The
On indicator lights when the operation
switch is on.
Important
❒ Do not turn off the main power
switch while On indicator is lit.
Doing so may damage the hard
disk.
5 6 7 8 9
16 15 14 13 12
Control Panel
1
10 11
ABB003S
17