ZUMEX Speed Pro + Plus Cleaning Instructions page 5

Recommended cleaning instructions
Weekly cleaning
Pressing assembly
For deep cleaning, disassemble
the Pressing Kit and clean all
the parts.
3
Lift the stainless-steel handles
Fortnightly cleaning
Drain&Clean
1
Insert the cleaning brush into the Drain&Clean
hole in the base of the feeder and remove
any residue that you may find in the draina-
ge tube.
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
1
Remove the peel ejectors located on the si-
des at the bottom.
4
Remove the juicing heads.
2
the knob located on the lower central part.
5
Clean all the parts with a sponge and soap,
rinse after with clean water. All the parts
can also be washed in a dishwasher.
www.zumex.com