Daily Cleaning - ZUMEX Speed Pro + Plus Cleaning Instructions

Cleaning instructions for components
Cleanliness and hygiene warnings
!
It is necessary to clean all parts that come into contact with the juice each day.
All the parts, with the exception of the cover and the tap,
can be put in a dishwasher to clean them.
Cleaning of the extraction area and any of its removable
parts must be done with a sponge soaked in soapy water
suitable for food use. Do not use scouring sponges that
could scratch the surfaces.

Daily cleaning

Blade, sub-filter, bin, peel guides, feed plate,
front cover, and tap
1
Clean the blade, sub-filter, bin, and peel
guides piece by piece with soapy water and
then rinse with clean water.
4
Clean the feeding plate with a soft sponge
to remove the remaining particles still stuck
to it.
Pressing assembly
To clean quickly,
clean the Pressing Kit assembly
in a single piece under a tap or
in a dishwasher.
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
2
Remove the side outputs from the front
cover.
5
Clean the whole tap by letting soapy water
run through the spout. Brush well at both
holes.
1
Clean the entire assembly with a sponge
and soap in a single piece under a tap. Move
the juicing heads around to make sure that
they are completely clean.
It is necessary to sterilise the machine with a disinfectant
product after each cleaning.
Rinse with plenty of water after sterilising, in order to
remove any remaining disinfectant.
3
Clean the side outputs and the central part
of the cover with a soft sponge to avoid da-
maging the material. Rinse with plenty of
water.
2
The assembly can also be washed in
a single piece in a dishwasher.
www.zumex.com