Sony DDS-4 Product Description Manual page 59

Table of Contents

Advertisement

6. COMMAND SPECIFICATION
RMB:
The Removable Medium bit is one, indicating that the tape can be removed.
Device-Type Modifier:
This is a seven-bit user defined code, set to 00h.
ISO Version:
This field is zero, indicating that the drive does not necessarily comply with the ISO version of SCSI.
ECMA Version:
This field is zero, indicating that the drive does not necessarily comply with the ECMA version of SCSI.
ANSI Approved Version:
This field is 2, indicating that the drive complies with the ANSI version of SCSI-2.
AENC:
The drive does not support asynchronous event notification, so this field is zero.
TrmIOP:
The drive does not support the Terminate I/O Process message so this field is zero.
Response Data Format:
This field is 2 indicating that the INQUIRY DATA format complies with the ANSI version of SCSI-2.
Additional Length:
The additional length field specifies the length in bytes of the parameters, in this case, 31 bytes.
RelAdr:
The drive does not support the Relative Addressing mode so this bit is never set.
WBus32:
The drive does not support 32-bit wide data transfers, so this bit is never set.
WBus16:
The drive does not support 16-bit wide data transfers, so this bit is never set.
Sync:
The drive supports synchronous data transfers, so this bit is set.
Linked:
The drive does not support linked commands, so this bit is never set.
CmdQue:
The drive does not support tagged command queuing, so this bit is never set.
SftRe:
The drive responds to the RESET condition with a HARD reset, so this bit is never set.
Vendor Identification:
This field contains eight bytes of ASCII data identifying the vendor of the product as "SONY". This and the next
two fields are left-aligned with the unused bytes at the end of the fields and filled with space characters (20h).
Product Identification:
This field contains sixteen bytes of ASCII data identifying the product as "SDT-10000/SDT-11000".
Product Revision Level:
This field contains four bytes of ASCII data, which define the SCSI Interface Revision Level.
6 - 8
SONY SDT-10000/SDT-11000 DDS Tape Drive
INQUIRY

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdt-10000Sdt-11000

Table of Contents