Sony DDS-4 Product Description Manual page 135

6. COMMAND SPECIFICATION
Sense Bytes
Key 12 13
7h
27 00
8h
00 00
00 05
9h
Ah
Bh
00 00
2C 00
43 00
45 00
47 00
48 00
49 00
4A 00
4B 00
4E 00
Ch
6 - 84 SONY SDT-10000/SDT-11000 DDS Tape Drive
Description
DATA PROTECT. Indicates that a WRITE type of operation was attempted on a
write protected tape, write operation is not performed.
WRITE PROTECTED - Cassette is Write Protected
BLANK CHECK. Indicates the drive encountered blank
medium or end-of-data indication while reading.
NO ADDITIONAL SENSE INFORMATION - Blank Tape was encountered at BOT
END-OF-DATA DETECTED - During READ or SPACE command.
Vendor Specific. Not supported by the SDT-10000/SDT-11000
COPY ABORTED. Not supported by the SDT-10000/SDT-11000
ABORTED COMMAND. Indicates that the target aborted the command.
If an invalid or inappropriate message was received during the operation, or a SCSI
bus protocol error was detected, the operation is terminated in an indeterminate state
and ABORTED COMMAND is returned. The initiator may be able to recover by
trying the command again.
NO ADDITIONAL SENSE INFORMATION - Aborted
Command - Host issued Abort message, Eject button pressed by an operator, or com-
mand protocol error.
COMMAND SEQUENCE ERROR - Unexpected SCSI phase sequence.
MESSAGE ERROR - Unexpected Message phase.
SELECT OR RESELECT FAILURE - SCSI Selection/Reselection error.
SCSI PARITY ERROR - SCSI Parity Error detected and drive proceeded to Status
phase.
INITIATOR DETECTED ERROR MESSAGE RECEIVED
INVALID MESSAGE ERROR - Illegal Message received and drive proceeded to
Status phase.
COMMAND PHASE ERROR
DATA PHASE ERROR - Possible DMA error
OVERLAPPED COMMANDS ATTEMPTED - Host issued a new command to the
drive while a previous command was being executed.
EQUAL. Not supported by the SDT-10000/SDT-11000
Table 6-50: Sense Key Descriptor (5/6)
REQUEST SENSE