Sony DDS-4 Product Description Manual page 169

APPENDIX B - ASC & ASCQ Numerical Order
BYTE
12 13 DESCRIPTION
00 00 NO ADDITIONAL SENSE INFORMATION
00 01 FILEMARK DETECTED
00 02 END-OF-PARTITION/MEDIUM DETECTED
00 03 SETMARK DETECTED
00 04 BEGINNING-OF-PARTITION/MEDIUM DETECTED
00 05 END-OF-DATA DETECTED
03 00 PERIPHERAL DEVICE WRITE FAULT
04 00 LOGICAL UNIT NOT READY
04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
09 00 TRACK FOLLOWING ERROR
0C 00 WRITE ERROR
11 00 UNRECOVERED READ ERROR
11 08 INCOMPLETE BLOCK READ
14 03 END-OF-DATA NOT FOUND
14 04 BLOCK SEQUENCE ERROR
15 01 MECHANICAL POSITIONING ERROR
15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
1A 00 PARAMETER LIST LENGTH ERROR
20 00 INVALID COMMAND OPERATION CODE
24 00 INVALID FIELD IN CDB
25 00 LOGICAL UNIT NOT SUPPORTED
26 00 INVALID FIELD IN PARAMETER LIST
26 01 PARAMETER NOT SUPPORTED
27 00 WRITE PROTECTED
28 00 NOT READY TO READY TRANSITION , MEDIUM MAY HAVE
CHANGED
29 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
29 80 DRIVE FAILED POWER-ON TEST OR DIAGNOSTIC - (SONY Unique)
2A 00 PARAMETERS CHANGED
ASC and ASCQ Assignments
Numerical Order
SONY SDT-10000/SDT-11000 DDS Tape Drive 8 - 3