Tape Capacity Log Page - Sony DDS-4 Product Description Manual

6. COMMAND SPECIFICATION

6. 06. 7 Tape Capacity Log Page

The Tape Capacity Log Page is used to indicate the approximate capacity of the tape currently being used. The PC field
of the LOG SENSE command is ignored for this field.
The 36 bytes of the log page have the following format:
Bit 7
Byte
0
1
2 (MSB)
3
4 (MSB)
5
6 DU (0)
7
8 (MSB)
11
Tape Capacity Log Page Parameters:
Code Value
0001 Remaining capacity, partition 0 (kilobytes)
0002 Remaining capacity, partition 1 (kilobytes), For a single partition tape, it will be zero.
0003 Maximum capacity , partition 0 (kilobytes)
0004 Maximum capacity, partition 1 (kilobytes). For a single partition tape, it will be zero.
6 5
DS (1) TSD (0) ETC (0)
Parameter Length (04h)
Table 6-19: Tape Capacity Log Page
4 3
Page Code (31h)
Reserved
Page Length (20h)
Parameter Code
TMC (11)
Parameter Value
SONY SDT-10000/SDT-11000 DDS Tape Drive
2 1 0
(LSB)
(LSB)
Reserved LP (0)
(LSB)
LOG SENSE
6 - 27