6. COMMAND SPECIFICATION
6. 21
REWIND 01h
Bit
7
Byte
0
1
Logical Unit Number
2
3
4
5
Unused (00b)
REWIND tells the drive to position the media at the beginning of the currently active partition. Before rewinding, the
drive writes any buffered data to tape and appends an EOD marker.
Immed:
When this bit is set, the drive writes any remaining buffered data followed by an EOD marker to tape. It then returns
status to the Host before beginning the actual rewind operation. If the Immed bit is not set, status will be returned
after the rewind has completed.
6
5
4
Operation Code (01h)
3
2
Reserved
Reserved
Reserved
Reserved
Reserved
SONY SDT-10000/SDT-11000 DDS Tape Drive
REWIND
1
0
Immed
6 - 87