Download Print this page
Heatstore HS2000T Installation And Operating Instructions

Heatstore HS2000T Installation And Operating Instructions

Downflow fan heater

Advertisement

Quick Links

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
IMPORTANT SAFETY ADVICE
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
or knowledge if they have been given
supervision or instruction concerning the
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision. Children
of less than 3 years should be kept away
unless continuously supervised. Children
aged from 3 years and less than 8 years
shall only switch on/off the appliance
provided that it has been placed or installed
in its intended normal operating position
and they have been given supervision
or instruction concerning the use of the
appliance in a safe way and understand
the hazards involved. Children aged from 3
years and less than 8 years shall not plug in,
regulate and clean the appliance or perform
user maintenance.
CAUTION:
Some parts of this product can become
very hot and cause burns. Particular
attention has to be given where children
and vulnerable people are present.
WARNING:
This heater is not equipped with a device
to control room temperature. Do not use
this heater in small rooms when they are
occupied by persons not capable of leaving
the room on their own, unless constant
supervision is provided.
WARNING:
Do not operate the heater with the top
cover removed. This could trip the fuselink.
This heater must not be operated without
the cover correctly in position.
This heater carries the warning symbol
indicating that it must not be covered.
Installation and Operating Instructions
Downflow Fan Heater Model : HS2000T
WARNING:
In order to avoid a hazard due to
inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
DO NOT place the heater directly below a
fixed socket outlet.
DO NOT place aerosols or other containers
susceptible to heat in the direct airflow
from the unit.
DO NOT use the heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
IMPORTANT:
This heater must be installed so that the
switches and other controls cannot be
touched by a person in the bath or shower.
WARNING: Disconnect the heater from
the electricity supply before undertaking
service or repair.
WARNING:
If the appliance is fitted in a bathroom,
a cable outlet will be necessary with the
supply to the unit controlled by a double
pole switch. The switch if inside the
bathroom should be pull cord operated
and if outside should be adjacent to the
entrance door. The appliance must be
mounted so that no part of it can be
touched by any person using bath or
shower.
DO NOT cover the appliance or place
material or garments on it, or obstruct the
air circulation around this appliance, for
example with curtains or furniture, as this
could cause over heating and a fire risk.
WARNING: The supply circuit to the heater
must incorporate a double pole isolating
switch having a contact separation of at
least 3mm.
This product is only suitable for well
insulated spaces or occasional use.
(IP22)
08/54400/0
Issue 1

Advertisement

loading

Summary of Contents for Heatstore HS2000T

  • Page 1 Installation and Operating Instructions Downflow Fan Heater Model : HS2000T (IP22) 08/54400/0 Issue 1 THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY ADVICE WARNING: In order to avoid a hazard due to This appliance can be used by children...
  • Page 2 Dimensions (millimetres) Model Specification HS2000T: 1 or 2kW + electronic run-back timer Fig. 1 General Installation Model Identifier(s) HS2000T WARNING: Minimum clearances must be adhered to when mounting the heater. Heat output Nominal heat output Pnom Supply cable is not supplied with this appliance and it...
  • Page 3 Fig. 2 Mains Cable Cable Entry 2 No. Keyhole Slots Hole for Screw Terminal Block Exploded view of Terminal Block Controls Cleaning and User Maintenance The heater can be switched on or off via the pull cord operation. The WARNING: Before undertaking cleaning or maintenance work on heater comes pre-programmed with a 30-minute runback timer.
  • Page 4 Unit 12, Access 12, Bristol, BS11 8HT © Heatstore. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Heatstore This product complies with the European Safety Standards EN60335:2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014:1, EN55014:2, EN61000:3-2...