Storing the heater When the heater is not used for long periods of time it should be protected from dust and stored in a clean dry place. SPECIFICATION: HS2020XCN IMPORTANT SAFEGUARDS 1700–2000W; 220-240V: ~50/60Hz; RATING 535w x 385h x 200d mm;...
Model covered by these instructions: Having decided on the location of the heater it is necessary to drill 2 fixing holes HS2020XCN – Convector heater with switches and thermostat 8mm diameter by 43mm deep at 417mm centres on a horizontal line at a minimum height of 400mm from the floor.
Need help?
Do you have a question about the HS2020XCN and is the answer not in the manual?
Questions and answers
Wiring the rocker switch
Wiring for a new switch