Download Print this page
Heatstore Turbo HS2020 Operating Instructions

Heatstore Turbo HS2020 Operating Instructions

Convector heater

Advertisement

Quick Links

G
If the Overheat protection continues to switch the heater off, check that the thermostat
switch is set correctly and refer to the Safety Instructions.
Cleaning the heater
Always unplug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
Storing the heater
When the heater is not used for long periods of time it should be protected from dust and
stored in a clean dry place.
SPECIFICATION: HS2020 Turbo
:
2000W; 240V: ~50Hz;
RATING
:
750W–1250W–2000W;
POWER RANGE
:
565w x 385h x 172d mm;
DIMENSIONS
/
:
3.0kG/4.0kG
GROSS
NET WEIGHT
ON E YE A R
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Telephone: 0117 923 5375 Fax: 0117 923 5374
Victoria Road, Avonmouth, Bristol BS11 9DB
www.heatstore.co.uk
ISSUE 1: 0310
HS2020 Turbo
Convector Heater
Operating Instructions
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Turbo HS2020 and is the answer not in the manual?

Questions and answers

Aal
January 24, 2025

Wiring diagram

User image 67941b97dca6d

Summary of Contents for Heatstore Turbo HS2020

  • Page 1 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Telephone: 0117 923 5375 Fax: 0117 923 5374 Victoria Road, Avonmouth, Bristol BS11 9DB www.heatstore.co.uk ISSUE 1: 0310...
  • Page 2: Safety Instructions

    Safety Instructions prior to drilling the holes for attachment purposes. Allowance must be made for the final floor covering, carpet etc, and if any skirting boards are G DO NOT use the heater unless the feet are correctly attached. present, the fixing holes must be a minimum of 400mm above the top edge of the skirting G ALWAYS ensure that the heater is placed on a firm level surface.