Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL FOR
HIGH LEVEL FAN HEATER
Model: HSHL3000RF
All electrical appliances produced by company are guaranteed for two years against faulty
materials or workmanship.
This applies only if the appliance has been used for purposes in
accordance with the instructions provided and has not been connected to an unsuitable electricity
supply, or subject to misuse, neglect, damage or modified or repaired by any person not
authorised by us. This guarantee is offered to you as an extra benefit and does not affect your legal
rights.
The correct electricity supply voltage is shown on the rating label attached to the appliance.
Reasonable care has been taken to ensure that this guide is accurate at the time of printing. In
the interest of progress company reserve the right to vary specifications from time to time without
notice.
1
Advertisement
Table of Contents
Related Manuals for Heatstore HSHL3000RF
Summary of Contents for Heatstore HSHL3000RF
- Page 1 INSTALLATION AND OPERATION MANUAL FOR HIGH LEVEL FAN HEATER Model: HSHL3000RF All electrical appliances produced by company are guaranteed for two years against faulty materials or workmanship. This applies only if the appliance has been used for purposes in accordance with the instructions provided and has not been connected to an unsuitable electricity supply, or subject to misuse, neglect, damage or modified or repaired by any person not authorised by us.
-
Page 2: Table Of Contents
Contents General Information 1.1 Warnings 1.2 Health and Safety 1.3 Electrical Supply 1.4 Location 1.5 Clearance Distance 1.6 Standards 2 Introduction 2.1 Introduction 2.2 HSTIRFX or HSRFC1R controllers 2.3 Electrical connections 3 Dimensions and Fixing locations 4 Installation details 4.1 Installation 5 Fault Detection and Indication 5.1 Fault flashes 5.2 Maintenance... -
Page 3: Warnings
200mm from the ceiling. heater’s outlet/inlet grille must not be obstructed during use. Any modifications made to the unit approved Heatstore will void manufacturer’s 1.6 Standards warranty and potentially... -
Page 4: Introduction
The heaters will not work without a controller. Fig.1 Heater with front cover open 2.2 HSTIRFX or HSRFC1R controllers The heater HSHL3000RF can be controlled by a Heatstore wireless HSTIRFX or HSRFC1R controller. Each controller can control any number of heaters... -
Page 5: Dimensions And Fixing Locations
3. Dimensions & Fixing locations... -
Page 6: Installation Details
4. Installation Details 4.1 Installation Step 1 Carefully unpack the heater. Loosen mounting screws, allowing the mounting bracket to be removed from the unit. Making sure that the mounting bracket is horizontal, fix the bracket to the wall using appropriate screws. Step 2 Remove the front cover by loosening the 2 screws at the bottom of the heater, on the... - Page 7 Models for wireless controls 5.4 Pairing heater to controller The wireless controlled models HSHL3000RF can only be controlled by Heatstore wireless In order to pair the RF heaters to a controller controller HSRFC1R or HSTIRFX. will require cycling the power to the heater...
-
Page 8: Fault Detection And Indication
6. Fault detection / indication 6.1 Fault Indication 6.3 Thermal and Fault Protection The units are protected from overheating in Heaters are equipped with electronic fault the event of fan failure or an obstruction of detection. In the event of a fault being detected, the free airflow by thermal cut-outs. -
Page 9: Wiring Diagrams
6.1 Wiring Diagrams HSHL3000RF 6.2 Blower Connections... - Page 10 • BS EN 60335.2.30 (2009) ETSI EN 301 489-1 V2.2.2 (2019) • ETSI BS EN 303645 ETSI EN 301 489-3 V2.1.1 (2019) HSHL3000RF PART NUMBER AND DESCRIPTION OF APPLIANCE: Martyn Field NAME OF RESPONSIBLE PERSON: Technical Manager POSITION: 03/07 /24...
Need help?
Do you have a question about the HSHL3000RF and is the answer not in the manual?
Questions and answers