Connect With Another Bluetooth ® Headset; Remove A Registered (Paired) Bluetooth ® Device From The List; Display Device List; Bluetooth ® Battery Save Function - Yaesu FT3DR Operating Manual

Connect with another Bluetooth
1. Press and hold the [DISP] key, and then touch [OP-
TION].
2. Touch [2 Bluetooth], and then rotate the DIAL knob
to select [ON].
3. If already connected to a Bluetooth headset, touch
[DISCON] to disconnect.
4. Touch [SEARCH].
Search Bluetooth devices to display them in the de-
vice list in the following order:
(1) Already registered, searched and found
Bluetooth devices: white letters
(2) Searched and found new
Bluetooth devices: white letters
(3) Already registered but not found by search
Bluetooth devices: gray letters
Touch [STOP] to cancel the search.
5. Rotate the DIAL knob to select the desired Bluetooth
device.
6. Touch [CONNECT] to connect.
Remove a registered (paired) Bluetooth
Select the Bluetooth device to be deleted in step 5 above, and touch [DEL].

Display device list

If [3 Bluetooth device list] is touched in step 2 above, Bluetooth devices that have al-
ready been registered are displayed in the device list without performing a search. Con-
nect by turning the DIAL knob and selecting the Bluetooth headset to connect and then
touch [CONNECT].
®
Bluetooth battery save function
Turning on the Bluetooth Battery Saver feature extends the battery life of the standby
Bluetooth headset.
When the Bluetooth battery save function is "ON", hands-free operation using VOX (Voice
Operated Transmit) function is not possible. Press the SSM-BT10 [Multifunction] key to
switch between transmit and receive. For details, refer to "Send by pressing the button on
the Bluetooth headset (when the VOX function is off)" (page 47).
46
®
headset
®
device from the list
2 Bluetooth
ON
Connected
SSM-BT10
SSM-BT10