Specifications - Yaesu FT3DR Operating Manual

C4fm/fm 144/430mhz dual band digital transceiver
Hide thumbs Also See for FT3DR:
Table of Contents

Advertisement

Specifications

z General
Frequency Range
Channel Steps
Mode of Emission
Frequency Stability
Antenna Impedance
Supply Voltage
Current Consumption
(Approx.)
Operating Temperature Range : -4°F to +140°F (-20°C to +60°C)
Case Size (W x H x D)
Weight (Approx.)
z Transmitter
Output Power
Modulation Type
Spurious Emission
90
: TX 144 - 148 MHz or 144 - 146 MHz
430 - 450 MHz or 430 - 440 MHz
: RX: A- Band 0.5 MHz - 999.995 MHz (USA Cellular Blocked)
B- Band 108 MHz - 580 MHz
: 5/6.25/8.33/9/10/12.5/15/20/25/50/100 kHz
(8.33 kHz: only for Air band, 9 kHz: only for AM Radio)
: F1D, F2D, F3E, F7W
: ±2.5ppm (-4°F to +140°F [-20°C to +60°C])
: 50Ω
: Nominal
7.2 V DC, Negative Ground (SBR-14LI)
7.4 V DC, Negative Ground (FNB-101LI)
10.5 - 16 V DC, Negative Ground (EXT DC JACK)
Operating 5.5 - 8.4 V DC, Negative Ground (Li-ion Battery pack)
6 - 16 V DC, Negative Ground (EXT DC)
10.5 - 16 V DC, Negative Ground (EXT DC: for Charging)
3.6 - 4.5 V DC, Negative Ground (with FBA-39)
:
140 mA (Mono Band Receive)
170 mA (Dual Band Receive)
86 mA (Mono Band Receive, Standby)
120 mA (Dual Band Receive, Standby)
67 mA (Mono Band Receive, Standby, Saver On "Save Ratio 1:10")
67 mA (Dual Band Receive, Standby, Saver On "Save Ratio 1:10")
+18 mA (GPS On)
+ 6mA (Digital)
120mA (AM / FM Radio)
900 μA (Auto Power Off)
1.6 A (5 W TX, 144 MHz 7.2 V DC)
1.9 A (5 W TX, 430 MHz 7.2 V DC)
: 2.44" x 3.94" x 1.28" (62 x 100 x 32.5 mm)
(with SBR-14LI, w/o knob, antenna & Belt clip)
: 9.95 oz (282 g) (with SBR-14LI & Antenna)
: 5 W (@ 13.8 V or SBR-14LI)
(LOW3: 2.5 W / LOW2: 1.0 W / LOW1: 0.3W)
0.9 W (FBA-39)
(LOW1: 0.3 W)
: F1D, F2D, F3E: Variable Reactance Modulation
F7W: 4FSK (C4FM)
: At least 60 dB below (@TX Power HIGH, LOW3)
At least 50 dB below (@TX Power LOW2, LOW1)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft3de

Table of Contents