Table of Contents
Advertisement
78
Fig. 54: Setting the working height
①
(1) - Screw
To set the working height:
1.
Loosen the screws (1) on the pedal rod.
2.
Loosen the screws (2) on both stand bars.
3.
To avoid jamming, slide the tabletop in or out evenly at both
sides.
The scales on the outer sides of the stand bars serve as an
adjustment aid.
4.
Tighten the screw (2) on both bars of the stand.
5.
Tighten the screws (1) on the pedal rod.
6.
Set the pedal ( p. 79).
(2) - Screw
Operating Instructions 195 - 01.0 - 11/2017
Setup
②
Advertisement
Table of Contents
