Table of Contents
Advertisement
32
Fig. 18: Setting the hook thread quantity (2)
④
⑤
⑥
⑦
⑧
(4) - Thread bobbin case retainer
(5) - Lower bar
(6) - Hole
To set the hook thread take-up (10):
1.
Loosen the screws (9).
2.
Move the hook thread take-up (10).
• tighter seam = move the front edge (7) towards the 0 on
the scale (8)
• more elastic seam = move the front edge (7) towards
the 5 on the scale (8)
Fig. 19: Setting the hook thread quantity (3)
① ④
⑥
⑤
(4) - Thread bobbin case retainer
(5) - Lower bar
⑨
(7) - Front edge
(8) - Scale
(9) - Screws
(10) - Hook thread take-up
(6) - Hole
-
(10)
Hook thread take-up
Operating Instructions 195 - 01.0 - 11/2017
Operation
⑩
⑩
Advertisement
Table of Contents
