Table of Contents
Advertisement
18
Important
Align the needle (2) in such a way that the groove (3) is pointing
to the rear.
5.
Tighten the threaded pin (4) through the hole in the thread
guide (5).
This requires that the thread guide (5) be assembled
completely straight to the needle bar (1).
Order
Always adjust the clearance between the hook and the needle (2)
after changing to a different needle thickness ( Service
Instructions).
Disturbance
An incorrect hook distance can cause the following disturbances:
• Changing to a thinner needle:
• Missing stitches
• Thread damage
• Changing to a thicker needle:
• Damage to the hook tip
• Damage to the needle
Operating Instructions 195 - 01.0 - 11/2017
Operation
Advertisement
Table of Contents
