Table of Contents
Advertisement
Maintenance
Operating Instructions 195 - 01.0 - 11/2017
Fig. 35: Lubricating the hook (2)
①
(1) - Screw plug
Checking the oil level
NOTICE
Property damage from incorrect oil level!
Too little or too much oil can cause damage the machine.
Top off oil as described.
To measure the oil level, you will need the dipstick (3) included in
the accessory pack.
To check the oil level:
1.
Keep the dipstick (3) ready.
2.
Open the right hook cover.
3.
Loosen the screw plug (1) on the filler opening.
4.
Insert the dipstick (3) into the hook drive housing (2).
5.
After a few seconds, pull the dipstick (3) out of the hook drive
housing (2).
59
Advertisement
Table of Contents
