Table of Contents
Advertisement
Fig. 8.7
Ovens
'Cook & Clean' Panels
The ovens have panels which have been coated with a special
enamel that partly cleans itself. This does not stop all marks
on the lining, but helps to reduce the amount of manual
cleaning needed.
The Cook & Clean panels work better above 200 °C. If you do
most of your cooking below this temperature, occasionally
remove the panels and wipe with a lint free cloth and hot
soapy water. The panels should then be dried and replaced
and the oven heated at 200 °C for about one hour. This
will make sure that the Cook & Clean panels are working
effectively.
DO NOT use steel wool, oven cleaning pads, or any
n
n
other materials that will scratch the surface.
Removing the Main Oven Linings
Some of the lining panels can be removed for cleaning.
If you wish to clean the enamel interior of the oven, you
will need to remove the shelves before removing the 'Cook
& Clean' panels . You do not have to remove the support
brackets to remove the panels. Lift each panel upward and
slide forward off the support brackets (Fig. 8.7).
Once the panels have been removed, the oven enamel
interior can be cleaned.
Refit in the reverse order.
22
Advertisement
Table of Contents
